Coin Pinger
Acoustic bullion authentication — free, private, on-device
Gold coin guide
Gold Panda 1 oz (pre-2016) — ping test & specs
The pre-2016 Gold Panda was struck at a full troy ounce (31.103 g, 32.05 mm) before the metric 30 g redesign. Its annual design changes never altered the specs that fix its ring.
Opens the free tester with this coin preselected — audio never leaves your device.
Official specifications
| Weight | 31.103 g |
| Diameter | 32.05 mm |
| Thickness | 2.7 mm |
| Composition | .999 fine gold |
Source: China Gold Coin Corporation. Coin Pinger checks measured weight and diameter against these values.
Expected resonance range
Provisional confidence*| Mode | Expected ring | Recommended variance |
|---|---|---|
| c0d2 | 3.55–4.26 kHz | ±9.1% |
| c0d3 | 8.23–9.75 kHz | ±8.5% |
| c0d4 | 14.32–16.98 kHz | ±8.5% |
A genuine Gold Panda 1 oz (pre-2016) rings within these ranges at its c0d2/c0d3/c0d4 vibration modes, fixed by its size and metal. The recommended variance is how far a genuine specimen's ring can sit from each center — built up in quadrature from real manufacturing tolerance and temperature (under 1%), phone-mic capture reproducibility (≈4%), an extra allowance on the fundamental for minting-asymmetry splitting, and a per-metal model-uncertainty term (largest for .9999 gold, whose modulus is least certain). The higher modes also carry a small thick-plate centre correction, since a real coin is not infinitely thin. The provisional-confidence tag reflects how well-established this metal's constants are: Computed from .9999 gold's annealed modulus — the least-certain material input, so the band is widened and this reference is best confirmed by calibrating a coin you know is genuine. These are guidance bands, not exact values — see the methodology for the exact formula, or calibrate your own coin in the app for a specimen-exact reference and tighten each peak per coin.
* These are computed guidance ranges. Certain your Gold Panda 1 oz (pre-2016) is genuine but it won't match? Send us its ring — we'll dig in and improve the reference.
🎙 Submit sample pingsHow to ping test a Gold Panda 1 oz (pre-2016)
- Hold — grip the coin by its center (a nodal point) in a coin ping-test holder so the rim rings freely; a fingertip at the center is a last resort.
- Tap — strike the edge with a striker near the microphone.
- Read the verdict — MATCH or NO MATCH against the peaks above, plus weight and size checks.
Gold Panda 1 oz (pre-2016) — frequently asked
How much does a Gold Panda 1 oz (pre-2016) weigh?
The official specification is 31.103 g in .999 fine gold (source: China Gold Coin Corporation). Coin Pinger's weight check allows ±0.3 g by default.
What size is a Gold Panda 1 oz (pre-2016)?
32.05 mm in diameter and 2.7 mm thick at the rim, per China Gold Coin Corporation. Note the average disc thickness is less than the rim caliper reading — the raised rim and relief concentrate metal at the edge.
What frequency does a genuine Gold Panda 1 oz (pre-2016) ring at?
Its fundamental (c0d2) vibration mode is computed to ring in the 3.55–4.26 kHz range, with higher modes near 8.23–9.75 kHz and 14.32–16.98 kHz. These are first-principles physics computations from the coin's published mass, diameter, and metal — not measurements of sample coins.
Why does my genuine Gold Panda 1 oz (pre-2016) ring slightly off the listed frequencies?
Phone-mic capture moves a genuine peak a few percent tap-to-tap — strike point, holding pressure, and the microphone's own response all matter. Temperature and normal minting tolerance add under 1%. The published band already allows for all of this; for a tighter reference, calibrate your own genuine Gold Panda 1 oz (pre-2016) in the app.
Does ping testing damage a Gold Panda 1 oz (pre-2016)?
No — the test needs only a light tap on the edge with a non-marring striker (a wooden pencil or plastic stylus works well), far gentler than normal handling. Hold the coin at its center so the rim can ring freely.